Fulree FW32D12A3 demo

Fulree FW32D12A3

The Fulree FW32D12A3 is a DC-DC converter that can convert from a range of input voltages to a stable 12V output. It can be found on eBay using the query "12V3A stabilizer" and purchased from multiple vendors.

The vendors often provide very sparse and superficial information, so I'll try to fill in the gaps. I've used this converter successfully to stabilize an unstable 12V power supply so that a voltage-sensitive device could run off it.

Characteristics

  Parameter MIN TYP MAX UNIT
VI Input voltage 5   32 V
VO Output voltage   12   V
Vn Output noise amplitude 1.82 V
fn Output noise frequency 10 kHz
ΔTA @ 3A Temperature above ambient 32 °C

Typical performance

Noise

The output of the power conditioner has irregular electrical noise of about 10 kHz with an amplitude of 1.82 V on its output.

Usage example

I came to this device because my new infotainment system in my car crashed every time I started the engine. That happens because the voltage drops to about 9 V when cranking the engine. So I put the Fulree inline with the constant power from the battery. To avoid cutting into the wiring of my car I ordered a ISO 10487 extension that I spliced the Fulree into.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.